How to properly and safely move the Refrigerator

 

If you are in the process of moving to a new home, moving heavy appliances, especially refrigerators, is very important. Or refer to the good ways below!

Steps to move the refrigerator safely and properly:
Step 1: Remove all foods from the refrigerator
You need to make sure all food in the refrigerator is removed or it could fall and break during transport or damage your refrigerator.

Step 2: Pull out all of the shelves
This is extremely necessary because when you remove the shelves to help the refrigerator reduce weight, but also help the shelf not to be disturbed during transportation.
Note: You must make sure that when removing the tray from the cabinet, the installation will be as simple as when you remove it.

Step 3: Unplug the refrigerator
Make sure that the power plug of the refrigerator is unplugged from the outlet or it is dangerous.
Note: After unplugging you should fold it neatly to avoid the phenomenon that it will prevent you from moving the refrigerator.

Step 4: Drain the ice and dry the refrigerator before moving
This is quite time consuming, so you need to do it at least 6 to 8 hours before moving. Moving the refrigerator while there is ice or standing water will be extremely dangerous because during the process it will shake quite strongly and water can accidentally get into the cracks in the device.

Step 5: Fasten the door
You should use a large wire to prevent them from accidentally coming out and harming your refrigerator. However, be careful not to tie the doors too tightly, as it can be difficult to open them after shipping is finished.
Note: Before attempting to fix the door of the cabinet, you need to pay attention to perform step 4 well because if you do not dry the refrigerator completely, the closed condition will create favorable conditions for bacteria and mold. grow inside of the refrigerator.

How to properly and safely move the Refrigerator

Step 6: Move the cabinet gently and safely
You need to pay attention to move the cabinet gently to avoid collision, causing scratches or damage to the cabinet.
Fasten the refrigerator to the trolley
Note: In the process of moving, if you go up or down stairs, you need to pay attention so there should be support from at least 2 people.
There are many people who make it easier to move a refrigerator.

Step 7: Put the refrigerator in a new location and continue using it
After moving your refrigerator is over, you can place it in the position you have previously chosen and reuse as a bulb. Note: You should not plug in and use the cabinet immediately, it is best to leave the cabinet in a new location for about 2 to 3 hours and then plug it in so that it will be more secure factors for safety as well as school precautions you want to change the location of the cabinet.


We will be happy to hear your thoughts

Leave a reply