FREQUENTLY ASKED ERRORS ON AIR FILTER AND HOW TO FIX
Air purifiers are gradually becoming more familiar and widely popular thanks to its excellent effects such as health protection, deodorizing in the air, purifying the air and killing fungi and bacteria. harmful, .. Yet many times we still make small mistakes in the process of using this device
The machine does not enter electricity
This is a common and common mistake when using an air purifier. The simple telltale sign is when you have plugged in and pressed the control button but the machine has no sign of operation. The cause for this problem is usually a problem with your electrical system; damaged plug or socket; the power source inside the machine was malfunctioning, broken; The power source used does not match the machine specifications (for example, machines originating in Japan often have to use 110V current, so you must use a power adapter when used in Vietnam), ..
How to fix:
In this case, first check that the plug and socket of the machine are plugged in properly, then check that the indoor power supply is working properly, but please pay attention to use the test pen. electricity to ensure safety, avoid electric shock. If the problem is the malfunctioning power supply, equip a current converter. If you have checked carefully and there is no sign of abnormality in the above factors, it is best to take the device to a genuine warranty center or contact the store or supermarket where you bought the product. support from experienced staff.
The machine does not produce moisture
The damaged humidifier makes the air after being filtered drier and is bad for your skin and respiratory system and your family.
You can fix this problem by checking if your air purifier is operating in “Air Purify”, “Pollen” mode (two humidifying functions), if not, you can change The machine’s running mode changes to “Skin Moiturize” or “Humidity”. Then you can further check the amount of water in the tray. If the tray runs out of water, the air purifier will not be able to perform the humidifying function, you need to add more water for the machine to operate normally. In addition, you should also pay attention to cleaning the wet filter section regularly to avoid accumulating dirt and cause clogging of the machine, it is better to clean the filter and filter periodically to allow the air system to circulate. be more advantageous, note that avoid using cleaning chemicals and sharp hard objects to clean.
The air purifier was working but there was a water leak
This error will be quite dangerous because leaking water will cause slippery, or damage the internal parts of the machine or electrical leakage cases, etc. The cause is usually from the water tank, which may be in a state. full or not tightly closed, or installation is not correct.
To remedy this situation, check to see if the water tank has closed the lid. If the tray is too full of water, rinse out the water leaving just enough water. Then close the lid carefully and reinstall properly.
Note, in case you have treated as above but the machine still has a water leak, please quickly contact the store where you bought the machine for professional support to check it.
The error is related to the air purification functions
This is the most important function for an air purifier, some of the common mistakes that affect it are:
Air purification function does not work
The way to recognize this situation is when the machine is still operating normally but no air purifier is detected, this may be due to a problem with the sensor of the air purifier. Normally, when the sensor is damaged, it will not accurately determine the pollution level leading to wrong operation, so even though the air is polluted, the machine still reports it at a safe level and no filtering is performed.
Air filtration function is ineffective
The ineffective air filtration function makes the air not filtered clean, smells and dirt still remains, causing waste of electricity and adversely affecting the health of users. This is usually caused by a malfunction in the filter system, possibly due to thick dirt or an obsolete filter.